KTI Hydraulics Inc.

Our Mission Statement

Improving Hydraulic Systems, Superior Quality, Unrivaled Customer Service and On Time Deliveries.

Contact KTI

Have a Question?





Top
 
KTI Hydraulics, Inc. / Support  / 395-CK001 Quick Connect Kit Assembly Instructions

395-CK001 Quick Connect Kit Assembly Instructions

Assembly Instructions Figure 1

 The PIN Connector is associated with the Push Button Pendant cable.
The RECEPTACLE Connector is associated with the DC Power Unit cable.

• Trailer should be in the fully lowered position.

• Disconnect ALL electrical power before proceeding.

• Remove 1-1/2 inch of jacket from each the Push Button Pendant cable and the Power unit cable.

• Slide the Cable Nut, Clamping Ring & Back Shell onto each cable.

• Strip 3/8 inch of insulation from each of the Red, Green, Black and White wires.

• Assemble each wire to its proper screw and tighten (see Figure 2).

• Assemble the Back Shells onto the PIN and RECEPTACLE Connectors and tighten.

Assembly Instructions Figure 2